Serving Redlands, CA and surrounding areas. (909) 488-7993
Redlands Masonry & Concrete is a masonry contractor serving Rialto, CA with brick wall installation, concrete repair, and driveway work. We have served Inland Empire homeowners since 2017 and respond within one business day.
Rialto's mix of older tract homes and newer subdivisions near the 210 Freeway means we handle brick walls across a wide range of property types and lot configurations. Properly reinforced brick walls hold up through the region's seismic activity and the soil movement that comes with every wet-dry cycle. See our brick wall installation service.
Many Rialto driveways were poured in the 1960s through 1980s and show the cracks that come from decades of 100-degree summers and clay soil movement underneath. Paver systems are a practical upgrade because individual units can be releveled when the ground shifts, rather than cracking the entire slab at once.
Block walls define property lines and enclose patios on nearly every residential lot in Rialto. Walls in this region need steel reinforcement through the cores to meet seismic requirements and to keep the structure stable when expansive soils push against the base after a wet winter.
Rialto homes built on concrete slab foundations - the standard for this area - can develop cracks and uneven spots when clay soils underneath shift through seasonal moisture changes. Homes from the 1960s through 1980s are at the age where that accumulated movement shows up as sticking doors, diagonal cracks at window corners, and gaps where walls meet the floor.
Mortar joints on brick and block walls throughout Rialto erode faster than in cooler coastal climates because Inland Empire heat shrinks and cracks mortar more aggressively over time. Tuckpointing - removing the worn mortar and packing in fresh material - stops water from getting behind the wall face during the short but intense rainy season.
Rialto lots are mostly flat grid layouts where the front walkway is one of the first things visitors and buyers see. Cracked or uneven concrete at the entry is both a safety issue and a curb-appeal problem. New concrete or paver walkways with proper base prep hold their grade far longer than replacement-in-place pours that skip the subgrade work.
The bulk of Rialto's housing was built between the 1950s and 1990s, which puts most homes in the range where original concrete flatwork, block walls, and mortar joints are at or past their expected service life. These are single-story and two-story tract homes on slab foundations, with stucco exteriors, concrete driveways, and block-wall property enclosures that were all poured or laid in the same era. At 30 to 70 years old, every one of those systems has been through hundreds of heat cycles, the occasional seismic event, and the chronic push-and-pull of clay soils that expand in wet winters and contract through long dry summers. That kind of accumulated stress does not show up all at once - it shows up as a crack here, a joint gap there, and eventually a wall that leans or a driveway that heaves.
Rialto sits at roughly 1,200 feet elevation on the flat San Gabriel Valley floor, which means it gets the full force of Inland Empire heat without the elevation cooling that areas closer to the mountains enjoy. Summer temperatures regularly exceed 100 degrees and can push toward 110 during heat waves. That sustained heat accelerates mortar degradation and dries out joint sealants faster than in milder climates. Santa Ana wind events in fall and winter also stress masonry structures - high-velocity, low-humidity air pulls moisture out of exposed mortar quickly, and wind-driven debris can damage wall faces and coping on older brick and block walls throughout the city.
Our crew works throughout Rialto regularly, and we understand the local conditions that affect masonry contractor work here. Structural projects that require permits go through the City of Rialto Building and Safety Division, and we know which project types in this city typically require permits and what the approval process involves.
Rialto is bounded by Interstate 10 to the south and State Route 210 to the north, and the neighborhoods vary noticeably between those two corridors. Older homes near the city center and south of Foothill Boulevard follow the classic Inland Empire tract-home pattern - flat lots, wide concrete driveways, and block-wall perimeters. North Rialto, closer to the 210, has larger homes built in the 1990s and 2000s with more varied lot grades and tile-roof construction. We adjust our material choices and footing depth recommendations based on where in the city a property sits and what the soil profile looks like there.
We also serve neighboring communities regularly. Homeowners in Fontana just to the west share the same valley-floor soil conditions and housing stock age as Rialto, and we run work across both cities on the same schedule throughout the week.
We respond within one business day. Describing what you are seeing - a cracking driveway, a leaning wall, a mortar joint that has crumbled away - helps us prepare the right questions and bring the correct tools to your estimate appointment.
We visit your Rialto property, look at the actual conditions, and give you a written estimate at no charge. We explain what is causing the problem, what work is needed, and what the cost will be - so you can make a decision without any pressure.
If your project requires a permit from the City of Rialto, we handle that before work begins. Once permits are in place, we schedule the job and show up on time with the crew and materials needed to complete it.
We complete the project on the agreed schedule, clean up the worksite before we leave, and walk you through the finished work. If anything needs follow-up, we handle it - you do not need to track us down.
We serve Rialto homeowners with free on-site estimates, no pressure, and a response within one business day.
(909) 488-7993Rialto is a city of roughly 103,000 people in San Bernardino County, incorporated in 1911 but built largely during the postwar decades when the Inland Empire expanded rapidly on the flat land east of Los Angeles. The city covers about 22 square miles of mostly flat valley terrain at approximately 1,200 feet elevation, situated between Fontana to the west and San Bernardino to the east along the Interstate 10 corridor. Most of the residential housing consists of single-family tract homes on modest lots - the standard wood-frame, stucco-exterior, slab-foundation construction that defines the Inland Empire's growth-era neighborhoods. The Rialto Airport, also known as Miro Field, sits on the west side of the city and has been a local landmark since the mid-20th century.
The northern part of Rialto, near the State Route 210 Freeway, saw a second wave of residential development in the 1990s and 2000s, adding larger two-story homes and wider streets to the city's housing mix. Rialto Unified School District, which serves over 24,000 students, is one of the larger districts in San Bernardino County and reflects how family-heavy the city's neighborhoods are. Neighboring communities including San Bernardino to the east and Colton to the southeast share Rialto's housing character and are served by the same crew on the same work routes.
Restore structural integrity and stop foundation damage before it spreads.
Learn MoreControl erosion and grade changes with a durable retaining wall.
Learn MoreInstall a beautiful masonry fireplace that becomes a home centerpiece.
Learn MoreBuild strong, long-lasting walls using quality concrete block masonry.
Learn MoreSet a solid foundation with precisely installed concrete block walls.
Learn MoreCreate a custom outdoor kitchen built to last through every season.
Learn MoreConstruct classic brick walls for boundaries, privacy, or decoration.
Learn MoreCall us or submit a request today - we respond within one business day and offer free on-site estimates across Rialto and the surrounding Inland Empire.
