Serving Redlands, CA and surrounding areas. (909) 488-7993
Redlands Masonry & Concrete serves Bloomington, CA with concrete block wall construction, driveway repair, and masonry work on the area's older single-family homes. We have worked throughout the Inland Empire since 2017 and respond to every inquiry within one business day.
Block walls are on nearly every Bloomington property built from the 1950s onward - they mark property lines, screen utility areas, and enclose backyards. Older block walls in this community often lack the steel reinforcement through the cores that current seismic standards require, and decades of clay soil movement leaves them cracked or leaning. See our concrete block wall service.
Many Bloomington driveways were poured 40 to 70 years ago and have never been replaced. That original concrete has been through hundreds of heat cycles that push temperatures above 100 degrees, plus the annual wet-dry soil movement that cracks and shifts flatwork. Pavers are a practical choice here because individual stones can be re-leveled if the ground shifts again rather than cracking the whole surface at once.
Bloomington's slab-on-grade ranch homes sit directly on soils that expand when wet and contract when dry. That movement is slow but consistent, and after several decades it shows up as diagonal cracks at door corners, sticking doors, and uneven floors. Homes built in the 1950s through 1970s are at the age where these signs appear most often.
Some older Bloomington homes have brick chimneys, planters, and decorative features that were built in the postwar decades. Those brick elements have mortar joints that are now 50 or more years old, and mortar that has degraded lets water in through every winter rain - water that accelerates deterioration from the inside out.
Block walls and concrete structures on older Bloomington properties often have surface deterioration from decades of Inland Empire sun and heat. Repointing and sealing existing masonry extends the life of a structure significantly - and costs far less than full demolition and replacement when the underlying block is still sound.
On Bloomington's modest residential lots, the front walkway is one of the most visible parts of the property. A cracked or sunken walkway creates a trip hazard and signals deferred maintenance to anyone approaching the house. Rebuilding in concrete or pavers fixes the safety issue and improves curb appeal at the same time.
Bloomington is an unincorporated community in San Bernardino County with a dense concentration of single-family homes built between the 1950s and 1990s. These are slab-on-grade ranch and tract houses - one-story homes on modest lots where concrete flatwork, block walls, and driveways make up a significant share of the visible exterior. At 30 to 70 years old, most of that original concrete and masonry was built to standards that predate current seismic reinforcement requirements, and it has been through decades of the soil movement and heat stress that the Inland Empire delivers every year. Block walls on postwar Bloomington properties are among the most common repair and replacement jobs we handle in this community.
The soils under Bloomington properties contain a mix of clay and sandy alluvial material that expands and shrinks with every wet winter and dry summer cycle. That movement is gradual but relentless, and it is the main reason driveways crack, walkways sink, and block wall footings shift over time. Summers here push consistently above 100 degrees from June through September, which accelerates the degradation of mortar joints and causes concrete to expand and contract more aggressively than in cooler climates. Homes near the I-10 freeway corridor also deal with years of vibration from heavy truck traffic, which loosens joints in flatwork and masonry faster than homes on quieter residential streets.
Our crew works throughout Bloomington regularly, and we understand the local conditions that affect masonry contractor work here. Because Bloomington is unincorporated, all permit applications for structural masonry work go through the San Bernardino County Building and Safety Division rather than a local city office. We know that process and handle the application as part of the job, so homeowners do not have to figure out county permitting on their own.
We know the neighborhoods here - from the streets near Bloomington Community Park to the homes closer to Bloomington High School on the east side, and the properties near the I-10 corridor to the north. The housing ages and soil conditions vary across the community, and we adjust footing depths and drainage designs based on what we find at each property. Block wall replacements near the freeway corridor get deeper footings because of the vibration history and the clay content in the soils in that part of Bloomington.
We serve neighboring communities on the same routes. Homeowners in Fontana to the west and Rialto to the east are on the same work schedule, and we know the shared Inland Empire valley floor conditions that all three communities deal with.
We respond within one business day. Describing what you are seeing - a cracked block wall, sunken driveway, or foundation concern - helps us ask the right questions and bring the right equipment to your property.
We come to your Bloomington property, assess the actual soil and structural conditions, and give you a written estimate at no charge. We tell you upfront whether patching will work or whether the job calls for full replacement - so there are no surprises later.
If your project requires a San Bernardino County permit, we handle the application and schedule around the county approval window. You do not need to navigate the unincorporated area permit process on your own.
We complete the project on the agreed timeline, remove all debris and materials from your property, and walk you through what was built or repaired. If a county inspection is required, we coordinate it.
Serving Bloomington homeowners since 2017. No charge for on-site estimates. We respond within one business day.
(909) 488-7993Bloomington is an unincorporated community in San Bernardino County with a population of roughly 23,000 to 26,000 residents. It sits between Rialto to the east and Fontana to the west, with Interstate 10 running along the northern edge of the community. Because it is unincorporated, public services including permits and code enforcement go through San Bernardino County rather than a local city government. You can find more background on the community at the Bloomington Wikipedia page. Bloomington Community Park is the main public gathering space for local families, and Bloomington High School anchors the community's east side.
The housing stock is almost entirely single-family detached homes, with a significant number of properties built between the 1950s and 1990s. Ranch-style layouts on modest lots are the standard - one-story homes with attached garages, concrete driveways, and block wall fencing that in many cases has never been replaced since it was originally built. Home values here are practical compared to coastal Southern California, and homeowners tend to focus on durable, cost-effective repairs and maintenance rather than cosmetic upgrades. Bloomington sits between Rialto and Fontana, and all three communities share the same soil conditions and climate patterns that drive masonry maintenance needs in this part of the Inland Empire.
Restore structural integrity and stop foundation damage before it spreads.
Learn MoreControl erosion and grade changes with a durable retaining wall.
Learn MoreInstall a beautiful masonry fireplace that becomes a home centerpiece.
Learn MoreBuild strong, long-lasting walls using quality concrete block masonry.
Learn MoreSet a solid foundation with precisely installed concrete block walls.
Learn MoreCreate a custom outdoor kitchen built to last through every season.
Learn MoreConstruct classic brick walls for boundaries, privacy, or decoration.
Learn MoreCall or submit your request today. We serve Bloomington homeowners and respond within one business day.
